Heat Cure Liquid

- Versatile Use: Ideal for full & partial removable dentures, denture repairs, relines, and custom acrylic trays.

- Superior Quality Formulation: Optimal viscosity for easy mixing, smooth processing, and complete polymerisation.

- High-Strength Results: Minimal residual monomer content ensures durable, long-lasting denture bases.

- Excellent Stability: Superior colour stability and dimensional accuracy for precise prosthetic fit.

- Professional-Grade Performance: Compatible with all standard heat-cure powders for consistent laboratory results.

Mixing Ratio: 2:1 by volume (1kg Powder: 500 ml Liquid)

1. Mixing the Material:
- Dispense 5-10ml Heat Cure Liquid into a clean mixing vessel.
- Sprinkle Heat Cure Powder onto the liquid for over 30-40 seconds.
- Tap gently 2-3 times on the side of the mixing pot.
- Remove excess powder by inverting the vessel.
- Spatulate for 45-60 seconds.
- Material will reach the dough stage in 15±3 minutes at 23℃.

2. Packing the Material:
- Pack the dough material into the mould.
- Cover with a polythene sheet.
- Replace the flask lid and apply pressure slowly under the bench press.
- Open the flask, remove the polythene sheet.
- Cut away excess material around the mould with a sharp instrument.
- Replace the flask lid and close it completely under the bench press.
- Transfer to the security flask clamp before curing.
- Optimal packing temperature: 20℃ - 30℃.

3. Curing Process:
- Standard Curing: Immerse the clamped flask in cold/warm water, bring slowly to a boil (7-10 minutes), then boil for 20 minutes.
- Thick Section Curing: Immerse flask in boiling water, turn off heat for 20 minutes, reheat and boil for another 20 minutes.

Important: Flask must be fully covered by at least 5-7cm of water.

Storage: Store in a cool, dry place away from direct sunlight. Keep the container tightly closed.

Safety: Use in a well-ventilated area. Avoid skin and eye contact. Follow laboratory safety protocols.